Happy Birthday Topper (생일 토퍼)

- Source: https://cults3d.com/en/3d-model/various/topper-happy-birthday-farruquito-22f8

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4

- Time: 3h 16min

- Size: 160.9 x 171 x 3.6 mm^3 (10 % reduction of original size)

Toothpaste dispenser output (치약 디스펜서 출력물)

- Source: Please, make a request in the comment area.

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4

- Time: 15 min

- Size: 81.0 x 30.0 x 3.0 mm^3

Battery dispenser output: AA and AAA using 'Ender 5' 3D printer (3D 프린터 'Ender 5'을 이용한 배터리 분배기 출력물)

- Source: https://www.thingiverse.com/thing:3358129

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4

- Time: 10h 10min

- Size: 104.5 x 80.0 x 100.0 mm^3

- Comment: The design is good, but the battery hangs well in the exit parts. 

(Refer to the comments on the web site.)

Phone holder output using 3D printer 'Ender 5' (3D 프린터 'Ender 5'을 이용한 휴대폰 받침대 출력물)

- Source: https://www.thingiverse.com/thing:525066

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4

- Time: 3h 6min

- Size: 76.7 x 90.5 x 25.0 mm^3

Snoopy output using 3D printer 'Ender 5' (3D 프린터 'Ender 5'을 이용한 스누피 출력물)

- Source: https://www.thingiverse.com/thing:1261540

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4.1

- Time: 4h 25min

- Size: 44.5 x 87.8 x 60.1 mm^3

Testbed output to check the performance of 'Ender 5' 3D printer (3D 프린터 'Ender 5'의 성능을 확인하기 위한 테스트베드 출력물)

- Source: https://www.thingiverse.com/thing:533472

- 3D printer: Creality Ender 5

- Software: Ultimaker Cura 4.4.1

- Time: 1h 28min

- Size: 75.3 x 72.9 x 40.9 mm^3

Design and assemble 'fluorescence glasses' (야광안경 디자인 및 조립)

- We design glasses' bridge and temple using a CAD program and two elements are printed by 3D printer. After then, these are assembled with fluorescence rods.

- CAD로 '안경브릿지'와 '안경다리'를 디자인해 3D 프린터로 인쇄한 부품들을 야광봉과 연결시켜 야광안경을 만든다.